Filter Housing Accessories
High Quality Pall Filter Housing Accessories Ensure Optimal Filtration
Advanta™ Jacketed Filter Housings
Pall Advanta Jacketed Filter Housings are fabricated with either T-Type or In-Line flow designs and AB style Code 7 fitting configurations for single open-ended (SOE) sanitary AB style filter cartridges. They offer the added feature of a 316L stainless steel jacket for temperature control using hot water or steam, and are suitable for gas service or liquid flows to 20 gal/min (75 L/min) with minimal pressure drops.
These premium housing are corrosion resistant: 316 L Stainless steel jacket for temperature control. In-Line or T-Type flow designs are available and the entire housing is electropolished. Low hold-up volume maximizes product recovery and easy-draining features, including downward sloping internal contour and low-point drain allows easy removal of CIP solution or product. Fewer welds results in an extremely sanitary design, and automated orbital welding produces consistent high quality welds. Non-rotating vents and drains prevent twisted hoses and allow hard piping.
Manufactured for use in conformance with cGMP, Pall Advanta Jacketed Filter Housings are Manufacturing Quality System Certified to ISO 9000 Standards.
Advanta™ Electrical Trace Heater
The Advanta™ Electrical Trace Heater is ideal for hot water tank vents, providing elimination of condensate to comply with current GMP. It is also good for freeze dryer vacuum break filters that work on removal of residual water after steaming or integrity testing. It can provide filtration of ointment bases-reduction of viscosity or liquidification. This premium accessory is also ideal for bulk active ingredient production as temperature control helps avoid crystalization during filtration.
In many applications, electrical trace heaters for Pall Advanta housings offer a number of benefits. Easy installation allows simple upgrade of existing housings. The preformed cylindrical silicone jacket is self-aligning with the Pall Advanta housing bowl. It can also be used on housings with 100 mm nominal diameter bowls. Simple temperature adjustment is possible.
The control box has a digital input from ambient to 140 °C. There is a large LED display of actual temperature, measured by PT100 or Thermocouple. A separate IP54 rated control box allows full control independent of the housing location. This superior product offers low overall installation cost because no expensive steam valves, piping or pressure regulators are required. Easy removal or access for changeout of filter element is standard.
Filter housing accessories ensure optimal filtration in biopharmaceutical applications. Click here for purchase information or talk with a Pall expert.