Your integrated partner in Power Generation
Steam Plant Control Fluid Filtration – Protecting Critical Control Systems
Our control fluid filters minimize fluid contaminants in steam turbine control systems, which protects crucial components from corrosion and enables turbines to run at peak efficiencies.
The primary objectives for the steam turbine control (or governing) system is to maintain a constant speed of rotation irrespective of the varying load requirement, to regulate the rate of steam inlet and assign the alignment of vanes in the compressor. Steam turbines are dependent on hydraulic systems in steam valves to control and regulate critical operations. Our filters and purifiers for control fluid in steam plants remove contaminants and water content in hydraulic fluids to optimize power and control steam plant functions. Maintaining the correct levels of fluid cleanliness and condition is essential to prevent:
- Increased downtime and loss of production
- Costly fluid disposal and component replacement
- Increased operating and maintenance costs
- Decreased efficiency of energy transmission
- Introduced friction to lubricated parts
- Inhibited effective heat transfer
- Corroded seals between moving parts
- Leakage, wear of elastomers and seals
- Erosive wear to valve body
Keeping Control Fluids in Steam Turbine Clean and Dry
Synthetic fluids are often used in control systems, operating at pressures of over 70 bar (1000 psi) to ensure a rapid hydraulic response. At these pressures, the potential for fluid leaks is greater as is the attendant fire hazard, making phosphate esters the hydraulic fluid of choice as they are fire-resistant, self-extinguishing, and inherently safer than other fluid chemistries. They also tend to be expensive fluids; therefore important that operators maximize their service life.
Phosphate ester fluids will decompose in the presence of elevated moisture, creating acids and alcohols; therefore operators should try to keep water levels lower than 500ppm for optimum performance. Reducing the moisture and subsequent acid levels will maintain the fluid's fire-resistant properties and prevent accelerated component corrosion. Pall’s range of HLP or HNP vacuum dehydration purifiers offer operators a wide choice of sizes and system flow rates to provide continuous off-line water removal treatment, protecting the control system regardless of load. In addition, ion exchange treatment by the Pall Sentry resin system effectively removes acid to extend fluid service life, minimize corrosion and fouling due to deposit and/or varnish formation.
Fluid cleanliness specifcations are maintained by Pall’s Athalon™ hydraulic and lube oil filters which combine Betax(c)≥2000 rated, stress-resistant filter technology and a full range of housings to provide the greatest overall filter performance and value available in the Power Generation industry today. Most importantly, the Athalon filter media has anti-static properties preventing the incidence of electrostatic discharge and further potential varnish formation. Click here to learn more about Athalon filters.
Our control fluid filters are the most economical and effective option to keep fluid contaminants minimized in all steam turbine control systems. Contact a Pall sales representative to optimize your control fluid filtration to maximize your plant’s performance.
Thank you for your interest a sales representative will contact you.
Expertise and customized services
Our filters for control fluid in steam plant limit the contamination that inhibits a control system’s primary functions, so system components efficiently perform the necessary functions for high and low-pressure applications.
· Globe Valves
· Three-way valves
· Angle Valves
· Ball Valves
· Segmented Ball Valves
· Extended operating life of control valves
· Increase plant efficiency
· Enhanced process control
· Low leakage rates
· Extended control fluid life
Our control fluid filters are the most economical and effective option to keep fluid contaminants minimized in all steam turbine control systems. Click here to let a Pall expert optimize your control fluid filtration to maximize your plant’s performance.
Looking for more information? Our knowledgeable subject matter experts are ready to help. To learn more about our advanced and innovative filtration solutions, contact us today. Thank you and we look forward to assisting you shortly.
We will get in touch with you very shortly.